Provision-ISR NVR-4100 Manual de usuario descargar pdf (Pagina 21)

would help the user to recognize the device remotely.

Device ID: This ID is used to map the NVR with IR remote controller and speed dome

cameras.

Video Format: Two modes: PAL and NTSC. User can select the video format according to

the cameras being used.

Password Check: If enabled the user would need to input the user name and the password for

performing corresponding operations.

Show System Time: If selected, displays the current time during live monitoring.

Max Online Users: To set the maximum number of concurrent user logins in the NVR.

Show wizard: If selected, the GUI would launch the startup wizard on every boot, allowing

user to do basic setup.

Video Output: Resolution of live display interface.

Language: To set up the menu language.

Note: After changing the language and video output, the device needs to login again.

Logout After (Minutes): You can setup the screen interval time (30s, 60s, 180s, 300s). If

there is no any operation within the setting period, the device will auto logout and return to the

No Image When Logout: If selected, there will be no image showing when logout.

5.1.2 Date & Time

Step 1: Enter into MenuSetupBasicDate & Time tab. Refer to Fig 5-4:

Fig 5-4 Basic Configuration-Date & Time

Step 2: Set the date format, time format, time zone in this interface; checkmark “sync time

with NTP server” to refresh NTP server date. You can adjust system date manually.

Step 3: Click “Apply” button to save the settings.

5.1.3 DST

Step 1: Enter into MenuSetupBasic DST interface. Refer to Fig 5-5:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 74 75

Sin comentarios

Provision-ISR NVR-4100 Manual de usuario Pagina 21