Provision-ISR SA-32800 Manual de usuario descargar pdf (Pagina 41)

Digital Video Recorder User Manual

4.3.2 Record stream

Step1: go to system configurationrecord configurationrecord bit rate; refer to Fig 4-12:

Step2: setup rate, resolution, quality, encode and max bit stream

Step3: setup every channel with the required parameters, or mark “All” and set to apply the changes to all channels.

Reset default setting; click the “default” button and then “apply” button to save the setting. Press the “exit” button to exit current

interface.

Note: if the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.

Fig 4-12 record configuration-record bit rate

*Only in NE or HD Series

4.3.3 Time

Step1: go to system configuration=>record configuration=>time; refer to Fig 4-13:

Pre-alarm record time: prerecord time before being triggered; (motion/sensor) triggering.

Post-alarm record: recording time after the alarm has stopped. There five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and

300s.

Parameter Meaning

Rate

Range from: 1-30（NTSC）1-25(PAL)

Resolution

Support CIF and D1

Quality

The higher the value is, the clearer the recorded

image is. Six options: lowest, lower, low,

medium, higher and highest.

Encode*

VBR and CBR

Max bit

stream*

Range from: 64 Kbps, 128 Kbps, 256 Kbps,

512 Kbps, 768 Kbps, 1Mbps, 2 Mbps

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 120 121

Sin comentarios

Provision-ISR SA-32800 Manual de usuario Pagina 41