Provision-ISR SA-16200AHD-1 Manual de usuario Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 81
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
AHD DVR User Manual
48
8.2 IERemoteSurveillanceviaLAN&WAN
InordertoviewtheDVRfromanetworkitmaybeconnectedtoaLAN/WANorinternet.The
networksetupshouldbedoneaccordingly.Pleaseref erto4.6NetworkSetup.
8.2.1ViaLAN
GototheDVR’sMainMenuSetupNetworkinterfacetoinputIPaddress,Subnet
Mask,etc.IfusingDHCP,pleaseenableDHCPinboththeDVRandtherouter.
EnterRecordSetuptosetnetworkvideoparameterslikeresolution,framerateetc.
OpenIEonacomputeronthesamenetwork.InputtheIPaddressoftheDVRinIE
addressbarandpressenter.
IEwilldownloadActiveXcomponentautomatically.Entertheusernameandpasswordin
thesubsequentwindow
Notice:IfHTTPportisnot80,addtheportnumberafterIPaddress.Forexample,set
HTTPportas82,inputIPaddresslike192.168.0.25:82.Usernameandpasswordhere
arethesamewiththatusedontheDVR.Thedefaultusernameandpasswordisadmin
and123456.
8.2.2ViaWAN
TherearetwowaysfortheDVRtoconnecttointernet.
1.ConnecttheDVRtoint ernetthroughrouterorvirtualserver.
GototheDVR’sMainMenuSetupNetworkinterfacetoinputIPaddress,SubnetMask,
etc.IfusingDHCP,pleaseenableDHCPinboththeDVRandrouter.
ForwardIPaddressandportnumberinVirtualServersetupoftherouterorvirtualserver.
Configure the firewall to allow accessing the DVR (If the user has enabled the UPnP
functioninboththeDVRandrouter,hecanskipthisstep).
Ifuserswanttoutilizedynamicdomainname,pleaseapplyforadomainnameinaDNS
serversupportedbytheDVRorrouter.ThenaddtotheDVRorrouter.
OpenIEbrowser,inputIPaddress,ordynamicdomainnameandenter.IfHTTPportisnot
80,addtheportnumberafterIPaddressordomainname.
IEwilldownloadActiveXautomatically.Thenawindowpopsupandasksforusername
andpassword.Inputnameandpasswordcorrectly,andentertoview.
Note:IfyoucannotdownloadandinstallActiveX,pleaserefertoFAQQ7.
2.ConnecttheDVRtoint ernetdirectly.
GototheDVR’sMainMenuSetupNetworkinterfacetoenablePPPoEandtheninput
usernameandpasswordreceivedfromyourISP.Next,clickApply.TheDVRwillconnect
totheserverandwouldgiveaconfirmationmessage.
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 80 81

Comentarios a estos manuales

Sin comentarios