Provision-ISR NVR-16400 Manual de usuario descargar pdf (Pagina 22)

Step 2: In this interface, you can adjust brightness, hue, saturation and contrast in live. Click

“OK” button to save the setting.

5.2.2 Main Monitor

The main monitor settings allow you to set camera sequence in live display mode.

Operate the following steps to set main monitor:

Step 1: Enter into MenuSetupLive Main Monitor interface. Refer to Fig 5-7:

Step 2: Select display mode and channel.

Step 3: Select dwell time. Click button to set up the dwell time of the previous channel.

Click button to set the dwell time of the latter channel groups.

Step 4: Click “Apply” to save the setting.

Fig 5-7 Live Configuration-Main Monitor

5.2.3 Mask

If there is something you don’t want to display in the live image. You can set mask. For a

given channel a maximum of three areas can be masked. If the mask function is not available

in the added IP camera, the mask function here will not take effect.

To set up mask area:

Step 1: Enter into MenuSetupLive Mask interface.

Fig 5-8 Live Configuration-Mask

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 73 74

Sin comentarios

Provision-ISR NVR-16400 Manual de usuario Pagina 22