Provision-ISR NVR-16400 Manual de usuario descargar pdf (Pagina 48)

Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet

connection of Apple PC.

Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the NVR’s

Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and

Gateway according to the configuration of PC. The network segment should be the same as

the PC. If using DHCP, please enable DHCP in the NVR and router.

Step 4: After finishing the above information, users can enter LAN IP and http port in the

Safari browser. For example: input http://192.168.1.100:81(here 192.168.1.100 is LAN IP of

NVR, 81 is the http port of NVR). Click “ ”button, the browser will download Active X

control as shown below:

Step 5: Click icon and then select the Active X control, the welcome interface will be

shown. Click “Continue” “Install” button，the following window will pop up：

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 73 74

Sin comentarios

Provision-ISR NVR-16400 Manual de usuario Pagina 48