Provision-ISR NVR-16400 Manual de usuario descargar pdf (Pagina 23)

Step 2: Click Setting button to go into live image.

Step 3: Press and drag the left mouse button to set mask area as shown below.

Step 4: Right click to exit the mask setting interface.

Step 5: Click Apply button to save the setting.

To delete mask area

Step 1: Click Setting button in the mask interface.

Step 2: Select a certain masked area and double click to delete that masked area.

Step 3: Then click Apply button to save the setting.

Fig 5-9 Setting Mask Area

5.3 Record Configuration

Record configuration includes six sub menus: enable, record bit rate, time, recycle record,

stamp and snap.

Before Configuration, please make sure your NVR has been installed with HDD and has

completed its initialization.

5.3.1 Enable

Step 1: Enter into MenuSetupRecordEnable tab. Refer to Fig 5-10:

Step 2: Checkmark record and audio.

Step 3: Select All to set up the same settings for all channels.

Fig 5-10 Record Configuration-Record

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 73 74

Sin comentarios

Provision-ISR NVR-16400 Manual de usuario Pagina 23