
4) If there is no problem with the domain registration you will see the following message:
“Your domain was successfully created.”
If you do not see this message, the domain name you requested is already in use and you will
be requested to provide an alternate domain name (please note: domain name is sometimes
called host name).
You can create up to 35
domain records under a single
account
5) The domain name is added at the beginning of your DVR's address, for example the
domain "home" will appear as home.provision-isr-dns.com.
(b) Setting up your DVR to work with the DDNS server
1) The DDNS server will work
only if the three steps are
completed; (1) domain
registration, (2) correct
network configuration with
correct preferred/alternate DNS
servers, and (3) correct port
forwarding configurations are
set on the local network (your
router).
2) On the DVR Under Main menu => Settings => “Config” => “Network” set the correct
DNS servers;
For example take a look at the correct settings on the figure below; the router's IP address is
10.0.0.138
, the e-mail account registered is [email protected], and the host domain registered is "home.provision-isr-dns.com".
3) As shown on figure above: Check the “DDNS” check box, select “mintdns” for DDNS
type, and fill in all the other fields.
Comentarios a estos manuales