Provision-ISR NVR-16400 Manual de usuario descargar pdf (Pagina 31)

area. Click icon to clear the set detection area. Click icon to test the sensitivity as

per the local conditions. Once motion is sensed, it displays a figure icon. Click icon, to

save the setting. Click icon to exit the current interface.

Note: Prior to setting motion detection field, it is recommended that you click

icon to clear the existing field and set afresh.

Step 6: Select “All” to set the same settings for all channels.

Step 7: Click “Apply” button to save the setting.

Step 8: Enter into Schedule tab. The setting steps for schedule for motion based alarm are

similar to normal schedule setup (see Chapter 5.4.1 for more details).

5.5.3 Other Alarm

This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect Event,

etc.

Step 1: Enter into Menu  Setup Other Alarm. Refer to Fig 5-21:

Fig 5-21 Other Alarm

Step 2: Use the dropdown menu and select the event or the alarm.

Step 3: Check the required trigger options.

If the selected event is “Disk Full”, then use the drop down box for “Disk Shortage Alarm” to

choose a threshold value for remaining HDD space. If the threshold value is reached, the

system will trigger the Disk Full Alarm.

Step 4: Click “Apply” to save the setting.

5.5.4 Alarm Out

Alarm out includes three sub menus: alarm out, schedule and buzzer.

To set up alarm out:

Step 1: Enter into MenuSetupAlarm Out. Refer to Fig 5-22:

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 73 74

Sin comentarios

Provision-ISR NVR-16400 Manual de usuario Pagina 31