Provision-ISR NVR-16400 Manual de usuario descargar pdf (Pagina 45)

7.3 Disk Management

1. Format the disk

Step1: Enter into disk management tab.

Note: please format the hard disk before recording. If formatted, it will show the status of the disk-free

space, and total space at the bottom of screen.

Step2: Click Refresh button to refresh the disk information in the list box.

Step3: Select a hard disk and click Format button to start format.

Note: All recorded files in the hard disk will be lost once it is formatted.

2. Advanced

User may check model, S/N, firmware, health status of the disk in this interface. User also can

monitor the temperature, internal circuit, dielectric material of the disk, analysis the potential

problems of the disk and warn so as to protect its data.

7.4 Upgrade

The NVR can be upgraded by using USB flash drive. Get the upgrading software from your

vendor when there is a new software version.

Upgrade Steps:

Step 1: Copy the upgrade software which gets from vendor into the USB storage device.

Step 2: Connect the USB flash drive to the USB port.

Step 3: Enter MenuUpgrade tab. Then the upgrade software name would be displayed in the

upgrade list box.

Step 4: Select that software and then click upgrade button. It will upgrade automatically.

Note: Please wait for a while when the system is rebooting. Never cut off power during upgrading. The

original configuration will be reserved after upgrade.

7.5 Logoff

Enter Main Menu  Logoff tab. A log off dialogue box will pop up. The device will log off

by clicking “OK” button. If you want to log in again, click Main Menu icon to enter user name

and password to re-login.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 73 74

Sin comentarios

Provision-ISR NVR-16400 Manual de usuario Pagina 45