Provision-ISR NVR-16400 Manual de usuario descargar pdf (Pagina 24)

5.3.2 Record Bitrate

Step 1: Enter into MenuSetupRecord Record Bitrate. Refer to Fig 5-11:

Step 2: Set up rate, resolution, quality, encode and max bit stream.

Step 3: Select “All” to set the same settings for all channels.

Step 4: Click “Apply” button to save the setting.

Fig 5-11 Record Configuration-Record Bitrate

If the value of the parameter is set to exceed the maximum resources of the system, the system

will automatically adjust it.

5.3.3 Time

Step 1: Enter into MenuSetupRecord  Time interface to set recording time. Refer to Fig

5-12:

Step 2: Set Pre-alarm record time and post-alarm record time. Select “All” to set the same

settings for all channels.

Step 3: Click “Apply” to save the setting.

Parameter

Meaning

Record

To enable/disable recording for the channel

Audio

To enable/disable audio recording for the channel

Parameter

Meaning

Rate

Range from: 1-30（NTSC）1-25(PAL)

Resolution

Supports1080P, 720P, D1. Please select it as per the resolution your IP

camera supports.

Quality

The higher the value is, the clearer the recorded image is. Six options:

lowest, lower, low, medium, higher and highest.

Encode

VBR and CBR

Max bit stream

Range from: 256~12288kbps

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 73 74

Sin comentarios

Provision-ISR NVR-16400 Manual de usuario Pagina 24