Provision-ISR NVR-16400 Manual de usuario descargar pdf (Pagina 34)

Step 1: In the server interface, select “Enable” as shown in the Fig 5-25.

Fig 5-25 Network Configuration-Server

Step 2: Check the IP address and port of the transfer media server in the ECMS/NVMS. The

default server port for auto report is 2009. If it is modified, please enter into the transfer media

interface to check.

Step 3: Enable the auto report in the ECMS/NVMS when adding a new device. Then

self-define device ID and input the remaining information of the device in the ECMS/NVMS.

Step 4: Input the above-mentioned server IP, server port and device ID in the server interface.

Then click “Apply” button to save the setting. Now, the ECMS/NVMS system will

automatically connect this device.

5.6.4 Other Settings

If your NVR is set to use PPPoE as its default network connection, you may set up DDNS to

be used in connection. The setting steps are as follows:

Fig 5-26 Network Configuration-Other Settings

Step 1: Enable DDNS server.

Step 2: Select DDNS server.

Step 3: Enter user name, password and host domain name of the registered website.

Step 4: Click “Test” button to test the effectiveness of the relevant information.

Step 5: Click “Apply” button to save the setting.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 73 74

Sin comentarios

Provision-ISR NVR-16400 Manual de usuario Pagina 34