Provision-ISR NVR-16400 Manual de usuario descargar pdf (Pagina 32)

Fig 5-22 System Configuration-Alarm Out

Step 2: Input relay name and select hold time.

Step 3: Enter into Schedule tab. This will go into schedule setup interface. The setting steps

for schedule for alarm out are similar to normal schedule setup (see Chapter 5.4.1 for details).

This step is very important for alarm out. Even if you have enabled alarm out in the motion

based alarm or sensor based alarm, you will not see the result of alarm out if no schedule is

added here.

To set up buzzer:

Step 1: Enter into MenuSetupAlarm Out Buzzer.

Step 2: Checkmark Buzzer and set buzzer alarm hold time. This would trigger the buzzer

when the system is on an alarm.

5.6 Network Configuration

Network configuration includes four submenus: network, Email, server and other settings.

Network settings must be configured if NVR is used for monitoring over network.

5.6.1 Network

To set up network:

Step 1: Enter into MenuSetupNetworkNetwork tab. Refer to Fig 5-23:

Fig 5-23 Network Configuration-Network

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 73 74

Sin comentarios

Provision-ISR NVR-16400 Manual de usuario Pagina 32